Chimney Sheep Wrap : Regular


It’s natural for your Chimney Sheep draught excluder to get a little sooty after being in the chimney for a while. But when you’re ready to remove it to start a fire, how can you prevent unpleasant soot stains from marking your carpets and floor? A wrap is a no-hassle way of neatly storing your draught excluder, to avoid having to clean soot from the carpet.

SKU: CA034 Category:

Made from a robust bottle green canvas with PVC coated polyester (440gsm), the Chimney Sheep wrap come in two sizes:

  • Regular – Measuring 26.5″ (67cm) square, it will fit all but the largest three Chimney Sheep sizes (i.e. does not fit 14″ x 24″, 14″ x 28″ and 14″ x 36″).
  • Large – Suitable for the three largest sizes, the 14″ x 24″, 14 x 28 and the 14 x 36.

How do I use my Chimney Sheep wrap?

When you’re ready to remove your Chimney Sheep draught stopper and store it until its next outing, simply follow these steps:

  1. Open the Chimney Sheep wrap fully and place it on the floor directly in front of the hearth.
  2. Carefully remove your Chimney Sheep, making sure that any soot or debris falls into the grate.
  3. Give the Sheep a couple of taps to shake off any loose soot, then put it head down in the middle of the wrap.
  4. Fold the corners of the wrap around the sheep and tie the ribbon around it in a bow.

If there is any remaining soot in the wrap, it can be taken outside to be shaken. And if it gets mucky it can easily be wiped down as the inside of the wrap has a wipeable surface.

Your Chimney Sheep draught stopper can either be stored with the handle still threaded in or with the handle removed, to create a neat flat package. When you’re finished, the wrap will form a parcel which can be placed standing next to the fireplace or hung from a hook by the bottom of the handle, or it can just be stored in the log basket until it’s needed again.

When can I put my Sheep back in the chimney?

Once the fire is completely cold the wrap can be unwrapped and the sheep popped back in the chimney. If there’s any soot left in the wrap this can be carefully shaken out outside. If it gets mucky it can be wiped down as the inside of the wrap has an easily wipeable surface.